Toyota Tundra Service Manual: Installation

Toyota Tundra Service Manual / Vehicle Interior / Lighting / Fog Light Assembly(for Halogen Fog Light) / Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FOG LIGHT ASSEMBLY LH

(a) Attach the 2 guides to install the fog light assembly LH.

(b) Install the screw.

2. INSTALL FRONT BUMPER ASSEMBLY

(See page )

3. ADJUST FOG LIGHT AIMING

(See page )

    Disassembly

    Reassembly

    See More:

    Toyota Tundra Service Manual > Can Communication System: Check Bus 3 Line for Short to +B
    DESCRIPTION There may be a short circuit between one of the CAN bus wires and +B when no resistance exists between terminal 6 (CA3H) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3, or terminal 21 (CA3L) of the central gateway ECU (network gateway ECU) and terminal ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0341