Toyota Tundra Service Manual: Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY

(See page )

2. REMOVE FOG LIGHT ASSEMBLY LH

(a) for Type A:

(1) Remove the screw.

(2) Detach the 2 guides to remove the fog light assembly LH.

(b) for Type B:

(1) Remove the screw.

(2) Detach the claw and 2 guides to remove the fog light assembly LH.

*A

for Type A

*B

for Type B

    Installation

    Fog Light Relay

    See More:

    Toyota Tundra Service Manual > Vehicle Stability Control System: VSC does not Operate or VSC does not Operate Correctly
    DESCRIPTION When TRAC or VSC is operating, the skid control ECU (brake actuator assembly) blinks the slip indicator light to inform the driver that slippage occurred. When a communication malfunction with the ECM is detected, TRAC and VSC are disabled. Also, TRAC and VSC are disabled when a DTC is s ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2021 Copyright www.ttundra.com
    0.0358