Toyota Tundra Service Manual: Portable Player cannot be Connected Manually/Automatically

Toyota Tundra Service Manual / Audio, Visual, Telematics / Audio / Video / Audio And Visual System / Portable Player cannot be Connected Manually/Automatically

CAUTION / NOTICE / HINT

HINT:

Some versions of "Bluetooth" compatible audio players may not function, or the function may be limited using the radio and display receiver assembly, even if the portable audio player itself can play files (See page ).

PROCEDURE

1.

CHECK CONNECTED DEVICE SETTINGS

(a) Check if the portable player is registered as a connected device.

NOTICE:

If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.

Result

Result

Proceed to

The portable player is registered as a connected device

A

The portable player is not registered as a connected device

B

B

REGISTER PORTABLE PLAYER AS CONNECTED DEVICE

A

2.

CHECK SYMPTOMS

(a) Check the connection condition between the portable player and radio and display receiver assembly.

The portable player cannot be connected under any of the following conditions:

  • The portable player is connected to another device.
  • The portable player is connected to the radio and display receiver assembly using the handsfree function.
  • The radio and display receiver assembly has cleared the portable player registration.
  • The portable player is off.
Result

Result

Proceed to

The portable player cannot be connected automatically

A

The portable player cannot be connected manually

B

B

GO TO STEP 4

A

3.

CHECK AUTOMATIC CONNECTION SETTINGS

(a) Check the automatic connection settings of the "Bluetooth" audio.

(1) Check that the "Bluetooth" connection is on.

OK:

"On" is displayed.

NG

CHANGE "BLUETOOTH POWER" TO ON

OK

4.

CHECK PORTABLE PLAYER STATUS

(a) Check the status of the portable player.

(1) Check that the portable player is not in standby mode.

(2) Check that the portable player is not connected to another device (headphones, etc.).

OK:

The portable player is not in standby mode and not connected to another device (headphones, etc.).

NG

CHANGE PORTABLE PLAYER TO STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.)

OK

5.

CHECK USING ANOTHER "BLUETOOTH" AUDIO COMPATIBLE VEHICLE OF SAME MODEL

(a) Check if the portable player can be connected manually/automatically to another "Bluetooth" audio compatible vehicle of the same model.

OK:

The portable player can be connected manually/automatically.

NG

PORTABLE PLAYER IS NOT COMPATIBLE

OK

6.

REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES

(a) Remove additional devices which use radio waves.

(b) Check if the portable player can be connected manually/automatically.

OK:

The portable player can be connected manually/automatically.

OK

END (ADDITIONAL DEVICES ARE DEFECTIVE)

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Poor Sound Quality in All Modes (Low Volume)

    Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device

    See More:

    Toyota Tundra Service Manual > Vane Pump(for 1ur-fe): Inspection
    INSPECTION PROCEDURE 1. INSPECT VANE PUMP SHAFT AND BUSH IN VANE PUMP FRONT HOUSING (a) Using a micrometer, measure the diameter (a) of the vane pump shaft with vane pump pulley. (b) Using a caliper gauge, measure the inside diameter (b) of the vane pump front housing. (c) Subtract (a) from (b) to c ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2021 Copyright www.ttundra.com
    0.0218