Toyota Tundra Service Manual: XM Tuner Antenna Disconnected (B15FE,B15FF)

DESCRIPTION

These DTCs are stored when a malfunction occurs in the satellite radio antenna which is connected to the navigation receiver assembly.

DTC Code

DTC Detection Condition

Trouble Area

B15FE

Satellite radio antenna is not connected.

  • Satellite radio antenna assembly
  • Stereo component tuner assembly
  • Navigation receiver assembly

B15FF

A short occurs in satellite radio antenna.

CAUTION / NOTICE / HINT

NOTICE:

After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary.

PROCEDURE

1.

CHECK CONNECTION OF SATELLITE RADIO ANTENNA CABLE

(a) Check if the satellite radio antenna cable is securely connected to the stereo component tuner assembly.

OK:

Satellite radio antenna cable is securely connected.

NG

SECURELY CONNECT SATELLITE RADIO ANTENNA CABLE

OK

2.

CHECK SATELLITE RADIO ANTENNA ASSEMBLY

(a) Replace the satellite radio antenna assembly with a known good one (See page ).

(b) Clear the DTCs (See page ).

(c) Check for DTCs (See page ).

OK:

No DTCs are output.

OK

END (SATELLITE RADIO ANTENNA ASSEMBLY IS DEFECTIVE)

NG

3.

CHECK STEREO COMPONENT TUNER ASSEMBLY

(a) Replace the stereo component tuner assembly with a known good one.

for Column Shift Type:

for Floor Shift Type:

(b) Clear the DTCs (See page ).

(c) Check for DTCs (See page ).

OK:

No DTCs are output.

Result

Result

Proceed to

OK

A

NG (for Column Shift Type)

B

NG (for Floor Shift Type)

C

A

END (STEREO COMPONENT TUNER ASSEMBLY IS DEFECTIVE)

B

REPLACE NAVIGATION RECEIVER ASSEMBLY

C

REPLACE NAVIGATION RECEIVER ASSEMBLY

    D-Seat ECU Vehicle Information Reading/Writing Process Malfunction (B15F8)

    SD Card Communication Malfunction (B158C)

    See More:

    Toyota Tundra Service Manual > Starter(for 2.0 Kw Type): Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY (a) Apply high-temperature grease to the areas of the starter pinion drive lever indicated in the illustration. (b) Install the starter pinion drive lever and rubber seal to the starter center bearing clutch. (c) Install the ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0128