DESCRIPTION These DTCs are stored when a malfunction occurs in the CAN communication circuit.
PROCEDURE
(a) Clear the DTCs (See page
(b) Recheck for DTCs and check that no DTCs are output (See page
OK: No DTCs are output.
|
Toyota Tundra Service Manual > Supplemental Restraint Systems: Occupant Classification Ecu
Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL OCCUPANT CLASSIFICATION ECU (a) Check that the ignition switch is OFF. (b) Check that the cable is disconnected from the battery negative (-) terminal. CAUTION: Wait at least 90 seconds after disconnecting the cable fr ...