Toyota Tundra Owners Manual: Using a Bluetooth phone

Toyota Tundra Owners Manual / Multimedia / Bluetooth phone / Using a Bluetooth phone

The hands-free system is a function that allows you to use your cellular phone without touching it.

This system supports Bluetooth. Bluetooth is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.

Before making a phone call, check the connection status, battery charge, call area and signal strength.

If a Bluetooth device cannot be connected, check the connection status on the phone screen. If the device is not connected, either register or reconnect it.

Phone screen

To display the screen shown below, press the switch on the steering wheel or press the button.

Several functions are available to operate on each screen that is displayed by selecting the 4 tabs.

Device name
Bluetooth connection status

Bluetooth phone

■ Microphone The vehicle's built in microphone is used when talking on the phone.

The person you are speaking to can be heard from the front speakers.

Bluetooth phone

To use the hands-free system, you must register your Bluetooth phone in the system.

Status display

You can check indicators such as signal strength and battery charge on any screen.

Connection status
Signal strength
Battery charge

Bluetooth phone

Making a call

See More:

Toyota Tundra Service Manual > Sfi System: Oxygen (A/F) Sensor Heater Control Circuit Low (Bank 1 Sensor 1) (P0031,P0032,P0051,P0052,P101D,P103D)
DESCRIPTION Refer to DTC P2195 (See page ). HINT: Although the DTC titles say oxygen sensor, these DTCs relate to the Air-Fuel Ratio (A/F) sensor. Sensor 1 refers to the sensor mounted in front of the Three-Way Catalytic Converter (TWC) and located near the engine assembly. When one of these DTCs is ...