REGISTRATION CAUTION / NOTICE / HINT NOTICE: The Vehicle Identification Number (VIN) must be input into the replacement ECM. HINT: The VIN is in the form of a 17-digit alphanumeric vehicle identification number. The Techstream is required to register the VIN. PROCEDURE 1. DESCRIPTION NOTICE: The Vehicle Identification Number (VIN) must be input into the replacement ECM. HINT: This registration section consists of two parts: Read VIN and Write VIN. (a) Read VIN: Explains the VIN reading process in a flowchart. This process allows the VIN stored in the ECM to be read in order to confirm that the two VINs, the one provided with the vehicle and the one stored in the vehicle's ECM, are the same. (b) Write VIN: Explains the VIN writing process in a flowchart. This process allows the VIN to be input into the ECM. If the ECM is changed, or the ECM VIN and vehicle VIN do not match, the VIN can be registered or overwritten in the ECM by following this procedure. 2. READ VIN (a) Confirm the vehicle VIN. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON. (d) Turn the Techstream on. (e) Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Read. 3. WRITE VIN (a) Confirm the vehicle VIN. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON. (d) Turn the Techstream on. (e) Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Write. |
Toyota Tundra Service Manual > Vehicle Stability Control System: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Vehicle Stability Control System DTC No. Detection Item Link C1201 Engine Control System Malfunction C1225 SM Solenoid Circuit C1226 SA2 Solenoid Circuit C1227 SA3 Solenoid Circuit C1228 STR Solenoid Circuit C1234 Yaw Rate Sensor C1237 Speed Sensor Rotor Faulty C1241 Lo ...