|
Auto Cancel Condition |
Warning | Fail-safe Deactivation Condition |
|
Multi-information Display |
Master Warning Light |
Cruise Control Indicator |
Warning Buzzer |
| Open or short in stop light switch circuit |
Cruise Control Malfunction Visit Your Dealer |
Illuminates | Does not illuminate |
Sounds | Dynamic radar cruise control system is turned off and back on again using the cruise control main switch (ON-OFF button). |
|
Malfunction in SFI system |
- | Illuminates |
Does not illuminate | - |
Dynamic radar cruise control system is turned off and back on again using the cruise control main switch (ON-OFF button). |
|
If
either of the following conditions occurs, the ECM cancels control of
vehicle speed by the dynamic radar cruise control system (stored vehicle
speed is maintained):
- Vehicle speed is less than approximately 40 km/h (25 mph) while driving
with the dynamic radar cruise control system controlling vehicle speed
| - |
Does not illuminate | Illuminates |
- | Cruise control main switch is pushed to +RES |
- Malfunction in the millimeter wave radar sensor assembly
- Beam axis of millimeter wave radar sensor assembly misaligned
- Problem with stop light switch input circuit
- Problem with cruise control main switch cancel circuit
| Cruise Control Malfunction Visit Your Dealer |
Illuminates | Does not illuminate |
Sounds | Ignition switch ON again. |
|
If
the following condition occurs, the ECM cancels control of vehicle
speed by the dynamic radar cruise control system (stored vehicle speed
is maintained):
- Millimeter wave radar sensor assembly becomes dirty
| Radar Cruise Control Unavailable Clean Sensor |
Illuminates | Does not illuminate |
Sounds | The condition returns to normal (the resume function can be operated after fail-safe is deactivated). |
|
If
any of the conditions listed below occurs, the ECM cancels control of
vehicle speed by the dynamic radar cruise control system (stored vehicle
speed is maintained):
- Millimeter wave radar sensor assembly sensitivity reduced because of bad weather such as rain, fog, snow, or sandstorm
- Brake control by the dynamic radar cruise control system is temporarily unavailable
- The beam axis of the millimeter wave radar sensor assembly is being aligned
- The forward recognition camera is temporarily unavailable
- A system check is being performed after the engine has started
- Malfunction in trailer brake control system
| Radar Cruise Control Unavailable |
Illuminates | Does not illuminate |
Sounds | The conditions return to normal (the resume function can be operated after fail-safe is deactivated). |
- Vehicle stability control system operates while driving with cruise control system controlling vehicle speed
- TRAC system operates for a certain period of time while driving with cruise control system controlling vehicle speed.
- TRAC is turned off
- VSC is turned off
- Drive start control is performed
- Switching between 2WD and 4WD*
| - |
Does not illuminate | Illuminates |
- | Cruise control main switch is pushed to +RES |
