Toyota Tundra Service Manual: Dtc Check / Clear

Toyota Tundra Service Manual / Engine, Hybrid System / Cruise Control / Dynamic Radar Cruise Control System / Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Radar Cruise 1*1 / Trouble Codes.

(e) Enter the following menus: Powertrain / Radar Cruise 2*2 / Trouble Codes.

(f) Check for DTCs.

Click here

  • *1: Stored in the ECM
  • *2: Stored in the millimeter wave radar sensor assembly

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Radar Cruise 1*1 / Clear DTCs.

(e) Enter the following menus: Powertrain / Radar Cruise 2*2 / Clear DTCs.

(f) Clear the DTCs.

  • *1: Stored in the ECM
  • *2: Stored in the millimeter wave radar sensor assembly
    Distance Control Switch Circuit

    Fail-safe Chart

    See More:

    Toyota Tundra Service Manual > Automatic Disconnecting Differential Actuator(for 4wd): Installation
    INSTALLATION PROCEDURE 1. INSPECT DIFFERENTIAL VACUUM ACTUATOR ASSEMBLY (See page ) 2. INSTALL DIFFERENTIAL VACUUM ACTUATOR ASSEMBLY (a) Remove any old FIPG material and be careful not to drop oil on the contact surfaces of the differential tube and differential vacuum actuator assembly. (b) Clean t ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2021 Copyright www.ttundra.com
    0.02