Toyota Tundra Service Manual: Lost Communication with Main Body ECU (U0142,U0208)

Toyota Tundra Service Manual / Steering / Steering Column / Power Tilt And Power Telescopic Steering Column System / Lost Communication with Main Body ECU (U0142,U0208)

DESCRIPTION

The multiplex tilt and telescopic ECU receives signals from the main body ECU (multiplex network body ECU) and front power seat switch LH via CAN communication.

DTC Code

Detection Condition

Trouble Area

U0142

Lost communication with main body ECU (multiplex network body ECU)
  • CAN communication system
  • Main body ECU (Multiplex network body ECU)

U0208

Lost communication with front power seat switch LH
  • CAN communication system
  • Front power seat switch LH

PROCEDURE

1.

GO TO CAN COMMUNICATION SYSTEM

(a) Go to CAN Communication System.

Click here

NEXT

END
    Tilt and Telescopic Manual Switch Circuit

    Steering Column Assembly(for Manual Tilt And Manual Telescopic Steering Column)

    See More:

    Toyota Tundra Service Manual > Differential Carrier Assembly(for 3ur-fe, 3ur-fbe): Installation
    INSTALLATION PROCEDURE 1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY (a) Clean the contact surfaces of the rear differential carrier and rear axle housing. (b) Install a new gasket and the differential carrier with the 10 washers and 10 nuts. Torque: 72 N·m {734 kgf·cm, 53 ft·lbf} NOTICE: Be care ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0111