Toyota Tundra Service Manual: CD/DVD Sound Skips

Toyota Tundra Service Manual / Audio, Visual, Telematics / Audio / Video / Audio And Visual System / CD/DVD Sound Skips

PROCEDURE

1.	CHECK DISC

(a) Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc.

CHANGE DISC

2.	CHECK DISC

(a) Disc cleaning

(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.

NOTICE:

Do not use a conventional record cleaner or antistatic preservative.

END (DISC IS DIRTY)

3.	REPLACE DISC WITH ANOTHER AND RECHECK

(a) Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

END (DISC IS DEFECTIVE)

4.	CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

(a) Check that the radio and display receiver assembly is properly installed

Result

Result	Proceed to
OK (for Column Shift Type)	A
OK (for Floor Shift Type)	B
NG (for Column Shift Type)	C
NG (for Floor Shift Type)	C

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

See More:

Toyota Tundra Service Manual > Headlight Leveling Switch: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE LH for Double Cab: (See page ) for CrewMax: (See page ) 2. REMOVE COWL SIDE TRIM BOARD LH 3. REMOVE INSTRUMENT SIDE PANEL LH 4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH 5. REMOVE HEADLIGHT LEVELING SWITCH (a) Using a screwdriver, d ...

Toyota Tundra Service Manual: CD/DVD Sound Skips

Black Screen

Cellular Phone Inspection

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual