Toyota Tundra Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL WASHER HOSE ASSEMBLY

(a) Attach the 3 clamps to install the washer hose assembly.

(b) Connect the washer hose assembly.

2. INSTALL FRONT WASHER NOZZLE AND HOSE ASSEMBLY

3. INSPECT FRONT WASHER NOZZLE AND HOSE ASSEMBLY

4. ADJUST FRONT WASHER NOZZLE AND HOSE ASSEMBLY

5. INSTALL HOOD INSULATOR (w/ Hood Insulator)

(a) Attach the 2 guides to install the hood insulator.

(b) Install the 10 clips.

6. INSTALL HOOD TO RADIATOR SUPPORT SEAL

(a) Install the hood to radiator support seal with the 10 clips.

7. INSTALL HOOD BULGE ASSEMBLY

(a) Attach the 8 clips to install the hood bulge assembly.

(b) Install the 3 bolts.

Torque:

7.0 N·m {71 kgf·cm, 62 in·lbf}

    On-vehicle Inspection

    Rear Door(for Crewmax)

    See More:

    Toyota Tundra Service Manual > Power Tilt And Power Telescopic Steering Column System: System Diagram
    SYSTEM DIAGRAM Communication Table Transmitting ECU (Transmitter) Receiving ECU Signal Communication Method Main Body ECU (Multiplex Network Body ECU) Multiplex Tilt and Telescopic ECU IG SW signal Store command of driver seat memory Recall command of driver seat memory Auto away/return state signal ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2021 Copyright www.ttundra.com
    0.0301