INSTALLATION PROCEDURE 1. INSTALL RADIATOR GRILLE SUB-ASSEMBLY (a) Attach the 4 claws and 3 clips to install the radiator grille sub-assembly. (b) Install the 4 screws and 2 clips. (c) w/ Toyota Safety Sense P: (1) Connect the millimeter wave radar sensor connector. 2. INSTALL RADIATOR SIDE GRILLE LH (a) Attach the 2 claws and 3 guides to install the radiator side grille LH. |
Toyota Tundra Service Manual > Differential Carrier Oil Seal(for 3ur-fe, 3ur-fbe): Replacement
REPLACEMENT PROCEDURE 1. DRAIN DIFFERENTIAL OIL 2. REMOVE PROPELLER SHAFT ASSEMBLY (a) Remove the propeller shaft for 2WD (see page ). (b) Remove the propeller shaft for 4WD (see page ). 3. REMOVE REAR DRIVE PINION NUT (a) Using SST and a hammer, loosen the staked part of the nut. SST: 09930-00010 ( ...
