Toyota Tundra Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL RADIATOR GRILLE GARNISH (for Type A)

(a) Attach the 4 claws and 2 guides to install the radiator grille garnish.

(b) Install 2 new spring nuts.

2. INSTALL RADIATOR GRILLE GARNISH (for Type B)

(a) Attach the 4 claws and 2 guides to install the radiator grille garnish.

(b) Install 2 new spring nuts.

3. INSTALL RADIATOR GRILLE GARNISH (for Type C)

(a) Attach the 2 claw and guide to install the radiator grille garnish.

(b) Install 2 new spring nuts.

4. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Toyota Safety Sense P)

Click here

5. INSTALL MILLIMETER WAVE RADAR WIRE (w/ Toyota Safety Sense P)

Click here

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Blind Spot Monitor System: Dtc Check / Clear
    DTC CHECK / CLEAR 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the blind spot monitor system on. (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Trouble Codes. HI ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0261