Toyota Tundra Service Manual: Removal

Toyota Tundra Service Manual / Vehicle Interior / Exterior / Radiator Grille / Removal

REMOVAL

PROCEDURE

1. REMOVE RADIATOR SIDE GRILLE LH

(a) Detach the 2 claws and 3 guides as shown in the illustration to remove the radiator side grille LH.

2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

(a) w/ Toyota Safety Sense P:

(1) Disconnect the millimeter wave radar sensor connector.

(b) Put protective tape around the radiator grille sub-assembly.

*A

for Type A

*B

for Type B

*C

for Type C

-

-

Protective Tape

-

-

(c) Remove the 4 screws and 2 clips.

*A

for Type A

*B

for Type B

*C

for Type C

-

-

Protective Tape

-

-

(d) Detach the 4 claws and 3 clips and remove the radiator grille sub-assembly.

*A

for Type A

*B

for Type B

*C

for Type C

-

-

Protective Tape

-

-
    Reassembly

    Rear Body Side Panel Protector

    See More:

    Toyota Tundra Service Manual > 1ur-fe Intake: Vacuum Switching Valve(for Acis)
    On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. REMOVE V-BANK COVER SUB-ASSEMBLY 2. INSPECT VACUUM SWITCHING VALVE ASSEMBLY (for ACIS) (a) Disconnect the vacuum switching valve connector. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Co ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0132