REMOVAL PROCEDURE 1. DRAIN AUTOMATIC TRANSMISSION FLUID 2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY 3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY 4. DISCONNECT TRANSMISSION WIRE 5. REMOVE TRANSMISSION VALVE BODY ASSEMBLY (a) Remove the bolt, detent spring cover and detent spring.
|
Toyota Tundra Service Manual > Cylinder Block: Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT: Perform "Inspection After Repairs" after replacing the piston or piston ring (See page ). PROCEDURE 1. INSTALL STUD BOLT (a) Using an E8 "TORX" socket wrench, install the stud bolts. Torque: for stud bolt A : 20 N·m {204 kgf·cm, 15 ft·lbf} for stud bolt B ...
