PRECAUTION HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM (a) Turn the cruise control system off using the cruise control main switch (ON-OFF button) when not using the cruise control system. (b) Be careful as the vehicle speed increases when driving downhill with the cruise control system controlling vehicle speed. (c) The + (ACCEL)/RES (RESUME) operation changes according to the cruise control system status. When the cruise control system is controlling vehicle speed, the + (ACCEL) function operates. When the cruise control system is not controlling vehicle speed, the RES (RESUME) function operates. (d) While the cruise control system is controlling vehicle speed, if the cruise control indicator turns off and a warning message is displayed, turn the cruise control system off using the cruise control main switch (ON-OFF button) to reset the cruise control system. After the cruise control system is reset, if the cruise control system does not turn on, or if the cruise control system stops functioning immediately after being turned on, there may be a malfunction. (e) Do not use the cruise control system where the road conditions are as follows:
(f) Do not use the cruise control system while towing. |
Toyota Tundra Service Manual > Air Conditioning: Magnetic Clutch Relay
On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT MAGNETIC CLUTCH RELAY (MG CLT) (a) Remove the magnetic clutch relay from the engine room relay block. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified C ...
