DISASSEMBLY PROCEDURE 1. REMOVE REAR SPRING LEAF BUSH  (a) Put matchmarks on the bush on the front side of the vehicle. (1) Align the leaf spring with the openings and put matchmarks. (b) Use SST and a press, press out the bushes on both sides of the vehicle. SST: 09950-60010 09951-00350 SST: 09950-70010 09951-07150 NOTICE: Do not erase the matchmark on the leaf spring when removing the bush on the front side of the vehicle. |
Toyota Tundra Service Manual > Parking Brake Assembly: Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedures for the LH side and RH side. The procedures listed below are for the LH side. PROCEDURE 1. INSTALL PARKING BRAKE ANCHOR BLOCK (a) Install the anchor block with the 2 nuts. Torque: 86 N·m {877 kgf·cm, 63 ft·lbf} 2. CONNECT NO. 3 PARK ...
