PRECAUTION 1. HANDLING PRECAUTIONS FOR STEERING SYSTEM (a) Care must be taken when replacing parts. Incorrect replacement could affect the performance of the steering system and result in driving hazards. (b) Complete the adjustment of the
steering wheel and wheel alignment, and then initialize the steering
angle sensor. If the order is reversed, the steering wheel and wheel
alignment will become misaligned (See page 2. HANDLING PRECAUTIONS FOR SRS AIRBAG SYSTEM (a)
The vehicle is equipped with a Supplemental Restraint System (SRS).
Failure to carry out service operations in the correct sequence could
cause the SRS to unexpectedly deploy during servicing, possibly leading
to a serious accident. Before servicing (including removal/installation,
inspection and replacement of parts), be sure to read the precautionary
notices for the supplemental restraint system (See page
|
Toyota Tundra Service Manual > Engine Immobiliser System (w/o Smart Key System): Terminals Of Ecu
TERMINALS OF ECU CHECK TRANSPONDER KEY ECU ASSEMBLY (a) Disconnect the J26 transponder key ECU assembly connector. (b) Measure the resistance and voltage according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconnected. Tester Connection ...
