DESCRIPTION These DTCs are stored when a malfunction occurs in the satellite radio antenna which is connected to the radio and display receiver assembly.
CAUTION / NOTICE / HINT NOTICE: After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary. PROCEDURE
(a) Check if the satellite radio antenna cable is securely connected to the stereo component tuner assembly. OK: Satellite radio antenna cable is securely connected.
(a) Replace the satellite radio antenna assembly with a known good one (See page
(b) Clear the DTCs (See page
(c) Check for DTCs (See page
OK: No DTCs are output.
(a) Replace the No. 1 navigation wire with a known good one.
(b) Clear the DTCs (See page (c) Check for DTCs (See page
OK: No DTCs are output.
(a) Replace the stereo component tuner assembly with a known good one.
(b) Clear the DTCs (See page (c) Check for DTCs (See page
OK: No DTCs are output. Result
|
Toyota Tundra Service Manual > Ultrasonic Sensor(for Front Side): Inspection
INSPECTION PROCEDURE 1. INSPECT NO. 1 ULTRASONIC SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 (BI) - 5 (EI) Always 10 kΩ or higher 1 (BI) - 2 (BO) Always 10 kΩ or higher 3 (SI) - 4 (SO) Always ...