REMOVAL PROCEDURE 1. REMOVE TRANSMITTER HOUSING COVER Click here 2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY Click here 3. REMOVE TRANSMITTER BATTERY Click here |
Toyota Tundra Service Manual > Brake Actuator: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3. (b) Start the engine and run it at idle. (c) Select the Active Test mode on the Techstream. HINT: Refer to the Techstream operator's manual for further details. 2. INSPECT ACTUATOR MOTOR OPERATION (a) With ...
