DESCRIPTION These DTCs are stored when a malfunction occurs in the radio and display receiver assembly.
PROCEDURE
(a) Clear the DTCs (See page
(b) Check for DTCs (See page
OK: No DTCs are output. Result
|
Toyota Tundra Service Manual > Front Lower Suspension Arm: Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT NO. 1 SUSPENSION ARM LOWER SUB-ASSEMBLY LH (a) As shown in the illustration, move the ball joint stud back and forth 5 times before installing the nut. (b) Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque ...