Toyota Tundra Service Manual: Data List / Active Test

DATA LIST / ACTIVE TEST

1. READ DATA LIST

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body or Master Switch / Data List.

(e) Read the Data List according to the display on the Techstream.

Main Body

Tester Display

Measurement Item/Range

Normal Condition

Diagnostic Note

*1: w/o Jam Protection Function

*2: w/ Jam Protection Function

ACC SW

Ignition switch/ON or OFF

ON: Ignition switch ACC

OFF: Ignition switch off

"ON" is also displayed for this item when the ignition switch is ON.

IG SW

Ignition switch/ON or OFF

ON: Ignition switch ON

OFF: Ignition switch off

"OFF" is also displayed for this item when the ignition switch is ACC.

FL Door Courtesy SW

Front courtesy light switch LH/ON or OFF

ON: Driver side door is OPEN

OFF: Driver side door is CLOSED

-

FR Door Courtesy SW

Front courtesy light switch RH/ON or OFF

ON: Front passenger side door is OPEN

OFF: Front passenger side door is CLOSED

-

RR Door Courtesy SW

Rear courtesy light switch RH/ON or OFF

ON: Rear right door is OPEN

OFF: Rear right door is CLOSED

-

RL Door Courtesy SW

Rear courtesy light switch LH/ON or OFF

ON: Rear left door is OPEN

OFF: Rear left door is CLOSED

-

FL Door Lock Pos

Driver side door lock position switch signal/ON or OFF

ON: Driver side door is unlocked

OFF: Driver side door is locked

-

FR Door Lock Pos

Front passenger side door lock position switch signal/ON or OFF

ON: Front passenger side door is unlocked

OFF: Front passenger side door is locked

-

RR-Door Lock Pos SW

Rear door lock position switch signal/ON or OFF

ON: Either of rear door LH or rear door RH is unlocked

OFF: Both of rear door LH and rear door RH are locked

-

RL-Door Lock Pos SW

Rear door lock position switch signal/ON or OFF

ON: Either of rear door LH or rear door RH is unlocked

OFF: Both of rear door LH and rear door RH are locked

-

Door Lock SW-Lock*1

Door control switch lock signal/ON or OFF

ON: Either door control switch assembly is pushed to LOCK

OFF: Both door control switch assembly LH and RH are not pushed to LOCK

-

Door Lock SW-Lock*2

Door control switch lock signal/ON or OFF

ON: Door control switch assembly RH is pushed to LOCK

OFF: Door control switch assembly RH is not pushed to LOCK

-

Door Lock SW-Unlock*1

Door control switch unlock signal/ON or OFF

ON: Either door control switch assembly is pushed to UNLOCK

OFF: Both door control switch assembly LH and RH are not pushed to UNLOCK

-

Door Lock SW-Unlock*2

Door control switch unlock signal/ON or OFF

ON: Door control switch assembly RH is pushed to UNLOCK

OFF: Door control switch assembly RH is not pushed to UNLOCK

-

Door Key SW-Lock

Driver door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF

ON: Driver side door key cylinder is turned to LOCK

OFF: Driver side door key cylinder is not turned to LOCK

-

D Door Key SW-UL

Driver door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF

ON: Driver side door key cylinder is turned to UNLOCK

OFF: Driver side door key cylinder is not turned to UNLOCK

-

Master Switch

Tester Display

Measurement Item/Range

Normal Condition

Diagnostic Note

*: w/ Jam Protection Function

Door Lock Switch Status*

Driver door lock switch signal/ON or OFF

ON: Door control switch assembly LH turned to LOCK

OFF: Door control switch assembly LH not turned

-

Door Unlock Switch Status*

Driver door unlock switch signal/ON or OFF

ON: Door control switch assembly LH turned to UNLOCK

OFF: Door control switch assembly LH not turned

-

2. PERFORM ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Active Test.

(e) Perform the Active Test according to the display on the Techstream.

Main Body

Tester Display

Test Part

Control Range

Diagnostic Note

Door Lock

Door lock motor

LOCK/UNLOCK

-

D-Door Unlock

Driver door lock motor

ON/OFF

-

    Customize Parameters

    How To Proceed With Troubleshooting

    See More:

    Toyota Tundra Service Manual > Ultrasonic Sensor(for Rear Side): Inspection
    INSPECTION PROCEDURE 1. INSPECT NO. 2 ULTRASONIC SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 (BI) - 5 (EI) Always 10 kΩ or higher 1 (BI) - 2 (BO) Always 10 kΩ or higher 3 (SI) - 4 (SO) Always ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0108