Toyota Tundra Service Manual: System Description

SYSTEM DESCRIPTION

1. WIRELESS DOOR LOCK CONTROL SYSTEM

The wireless door lock control system functions to lock and unlock all the doors from a distance. The system is controlled by a handheld transmitter which sends radio waves to the door control receiver. The main body ECU (multiplex network body ECU) performs an ID code identification process and engages the door lock control.

2. FUNCTION OF MAIN COMPONENTS

Component

Function

Door control transmitter assembly

  • Has LOCK, UNLOCK and PANIC switch.
  • Transmits weak radio waves (recognition codes and function codes) to the door control receiver.
  • Illuminates the indicator light (LED) during transmission.

Door control receiver

Receives weak radio waves (recognition codes and function codes) and outputs them as code data to the main body ECU (multiplex network body ECU).

  • Front courtesy light switch
  • Rear courtesy light switch

Turns on when a door is opened and turns off when it is closed. Outputs door status codes (open or closed) to the main body ECU (multiplex network body ECU).

Unlock warning switch assembly

Detects if the key is inserted in the ignition key cylinder or not.

Door lock position switch

Transmits the door lock positions of each door to the main body ECU (multiplex network body ECU).

Main body ECU (multiplex network body ECU)

Sends wireless door lock control signals in response to the code data from the door control receiver and receives signals from each switch.

3. SYSTEM FUNCTION

The door control transmitter assembly has the LOCK, UNLOCK and PANIC switches. Operating these switches activates each function.

The wireless door lock control system has the following functions:

HINT:

Part of these functions can be customized.

Click here

Function

Operation

All door lock

Pressing the LOCK switch locks all doors.

All door unlock

(2-step unlock)

Pressing the UNLOCK switch twice within 3 seconds unlocks all the doors after the driver's door is unlocked.

Automatic lock

If none of the doors is opened within 60 seconds after they are unlocked by the wireless door lock control, all the doors will lock again automatically.

Panic alarm

Pressing the PANIC switch of the transmitter for longer than about 0.8 seconds causes the following alarms to activate:

  • Sounds the horn and security horn.
  • Flashes the hazard lights, headlights, and taillights.
  • Illuminates the front interior light (when the switch is in the DOOR position).

While the panic alarm is operating, pressing any switch of the transmitter cancels the alarm operation.

Answer back

  • When the doors are locked by wireless operation, the hazard warning lights flash once, and wireless door lock buzzer sounds once.
  • When the doors are unlocked by wireless operation, the hazard warning lights flash twice and wireless door lock buzzer sounds twice.

Door ajar warning*

The buzzer sounds when the LOCK switch is pressed when any of the doors are ajar, and it sounds for 5 seconds continuously. The buzzer stops when all doors are closed or the UNLOCK switch is pressed.

Wireless lock function with doors open

Pressing the lock switch of the door control transmitter assembly while the door is open causes the door to lock when it is closed.

Illuminated entry

When all the doors are locked, pressing UNLOCK causes the interior lights to come on simultaneously with the unlock operation.

Self-diagnostic mode

If the door control receiver receives normal radio waves from the door control transmitter assembly when the system is in diagnostic mode, it flashes the interior light in a normal pattern.

HINT:

  • *: When wireless lock with doors open function is set to "ON", this function is canceled even if set to "ON".
    Registration

    System Diagram

    See More:

    Toyota Tundra Service Manual > Pre-collision System: How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the pre-collision system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT 2. INSPECT BATTERY VOLTAGE (a) Measure the battery voltage. Standard voltage: 11 to 14 V If the voltage is below 11 V, replace or r ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0127