DIAGNOSIS SYSTEM DESCRIPTION (a) The transponder key ECU assembly controls the engine immobiliser system. Engine immobiliser system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3). CHECK DLC3 (a) Check the DLC3. Click here INSPECT BATTERY VOLTAGE (a) Measure the battery voltage. Standard voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the battery. |
Toyota Tundra Service Manual > Camshaft Oil Control Valve: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (a) Connect the Techstream to the DLC3. (b) Start the engine and turn the tester ON. (c) Warm up the engine. (d) Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Linear (Bank 1 ...
