Toyota Tundra Service Manual: Disassembly

DISASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE NO. 1 HEADLIGHT BULB

(a) Remove the No. 1 headlight bulb cover.

(b) Release the set spring lock and remove the No. 1 headlight bulb.

NOTICE:

Do not touch the No. 1 headlight bulb glass.

2. REMOVE FRONT TURN SIGNAL LIGHT BULB

(a) Turn the front turn signal light bulb socket with the front turn signal light bulb in the direction indicated by the arrow to remove them as a unit.

(b) Remove the front turn signal light bulb from the front turn signal light bulb socket.

3. REMOVE FRONT SIDE MARKER LIGHT BULB

(a) Turn the front side marker light bulb socket with the front side marker light bulb in the direction indicated by the arrow to remove them as a unit.

(b) Remove the front side marker light bulb from the front side marker light bulb socket.

    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Automatic Transmission System: Shift Solenoid "E" Control Circuit Low (Shift Solenoid Valve SR) (P0985,P0986)
    DESCRIPTION Shifting from 1st to 6th is performed in combination with ON and OFF operation of the shift solenoid valves SL1, SL2, S1, S2, S3, S4 and SR, which are controlled by the ECM. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shif ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0376