Toyota Tundra Service Manual: Reassembly

REASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FRONT SIDE MARKER LIGHT BULB

(a) Install the front side marker light bulb to the front side marker light bulb socket.

(b) Turn the front side marker light bulb socket with the front side marker light bulb in the direction indicated by the arrow to install them as a unit.

2. INSTALL FRONT TURN SIGNAL LIGHT BULB

(a) Install the front turn signal light bulb to the front turn signal light bulb socket.

(b) Turn the front turn signal light bulb socket with the front turn signal light bulb in the direction indicated by the arrow to install them as a unit.

3. INSTALL NO. 1 HEADLIGHT BULB

(a) Set the No. 1 headlight bulb to the headlight unit LH.

(b) Lock the set spring to install the No. 1 headlight bulb to the headlight unit LH.

NOTICE:

Do not touch the No. 1 headlight bulb glass.

(c) Install the No. 1 headlight bulb cover.

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Roof Drip Side Finish Moulding: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedures for the RH side and LH side. The procedures listed below are for the LH side. When installing a clip, heat the vehicle body and clip using a heat light. When installing the moulding, heat the vehicle body and moulding using a heat li ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright www.ttundra.com
    0.0057