Toyota Tundra Service Manual: Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
  • The pre-collision system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting.
Pre-collision System

Symptom

Suspected Area

Link

"Pre-Collision System Unavailable" is displayed

Perform millimeter wave radar sensor assembly adjustment*

Millimeter wave radar sensor assembly temperature malfunction

Millimeter wave radar sensor assembly low voltage malfunction

Millimeter wave radar sensor assembly

Combination meter assembly

Trailer brake control ECU (brake control with bracket relay)

"Pre-Collision System Unavailable Clean Sensor" is displayed

Foreign matter attached to millimeter wave radar sensor assembly

-

Millimeter wave radar sensor assembly

Combination meter assembly

"Front Camera Unavailable" is displayed

Check current condition of forward recognition camera based on related Data List items.

  • Abnormal forward recognition camera voltage
  • Forward recognition camera temperature outside of operational range

Forward recognition camera

Combination meter assembly

Millimeter wave radar sensor assembly

"Front Camera Unavailable Remove Debris On Windshield" is displayed

The forward recognition camera or windshield glass within the field of view of the forward recognition camera is dirty or fogged up

-

Forward recognition camera

Combination meter assembly

Millimeter wave radar sensor assembly

Although there is possibility of collision, pre-collision controls (all controls) do not operate ("Pre-collision System Unavailable" is not displayed)

Check if pre-collision system is canceled

-

Vehicle condition/environment does not match the pre-collision system operation conditions (Confirm control operation conditions)

Check installation condition of millimeter wave radar sensor assembly

Perform millimeter wave radar sensor assembly adjustment

Millimeter wave radar sensor assembly

Check installation condition of forward recognition camera

Perform forward recognition camera adjustment

Forward recognition camera

Although there is no possibility of collision, pre-collision controls (all controls) operate

Vehicle condition/environment does not match the pre-collision system operation conditions (Confirm control operation conditions)

Check installation condition of millimeter wave radar sensor assembly

Perform millimeter wave radar sensor assembly adjustment

Millimeter wave radar sensor assembly

Check installation condition of forward recognition camera

Perform forward recognition camera adjustment

Forward recognition camera

Pre-collision system does not operate

Check if pre-collision system is canceled

-

ECU power source circuit

Millimeter wave radar sensor assembly

Pre-collision system cannot be canceled (PCS warning light does not illuminate)

Check steering pad switch assembly condition

-

Combination meter assembly (check if indicator illuminates using Active Test)

Millimeter wave radar sensor assembly

Combination meter assembly

Pre-collision system warning timing cannot be changed (warning timing setting screen not displayed on multi-information display)

Millimeter wave radar sensor assembly

Combination meter assembly

  • *: If error code 7 is output during beam axis alignment, clear the DTCs and perform beam axis alignment again.
    Precaution

    System Description

    See More:

    Toyota Tundra Service Manual > Exterior: Tail Gate Protector
    Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL TAIL GATE PROTECTOR (a) Attach the 16 clips to install the tail gate protector. (b) Install the 4 clips. Removal REMOVAL PROCEDURE 1. REMOVE TAIL GATE PROTECTOR (a) Put protective tape around the tail gate protector. ( ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0337