REMOVAL PROCEDURE 1. REMOVE FRONT SEAT ASSEMBLY LH (a) for Power Seat: Remove the front seat (see page (b) for Manual Seat: Remove the front seat (see page 2. REMOVE FRONT SEAT ASSEMBLY RH (a) for Power Seat: Remove the front seat (see page (b) for Manual Seat: Remove the front seat (see page 3. REMOVE CENTER FRONT SEAT ASSEMBLY (a) Remove the center front seat (see page 4. REMOVE CENTER SEATBACK PANEL
5. REMOVE CENTER SEAT CUSHION SHIELD LH
6. REMOVE CENTER FRONT SEAT INNER BELT ASSEMBLY 
(a) Remove the bolt and the center front seat inner belt. |
Toyota Tundra Service Manual > Blind Spot Monitor System: Lost Communication with ECM / PCM "A" (U0100,U0125,U0126,U0129,U0142)
DESCRIPTION These DTCs are stored if there is a malfunction in the CAN communication system connected to the blind spot monitor sensor. HINT: If CAN communication system DTCs are stored, they may also be stored for other systems. DTC Code DTC Detection Condition Trouble Area U0100 Lost communication ...
).
