Toyota Tundra Service Manual: Check For Intermittent Problems



  • If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before operation history has been read out and saved, the operation history information could be lost.
  • The function "Read operation history" uses the current system time setting inside the Techstream and the time counter inside the controlling ECU to calculate the timings shown in the operation history. For this reason, before reading out the operation history, first make sure that the Techstream system clock is accurately set to the current time.

Operation History


Operation history: The main body ECU (multiplex network body ECU) records the theft deterrent system operation history, which can be read out using the Techstream.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Utility / Operation History.

(e) Following the instructions on the screen, save the operation history.

Operation History List

Battery Desorption

Hood Open

Luggage Open

Door Open

Door Unlock


Intrusion Sensor Detect

Glass Sensor

Tilt Sensor

Intrusion Sensor Sound Detect

Intrusion Sensor Detect at Window Open

Panic Alarm


Some items are not displayed depending on the type of vehicle.

Symptom Simulation

Click here

    Theft Deterrent System

    Customize Parameters

    See More:

    Toyota Tundra Service Manual > Vehicle Stability Control System: Test Mode Procedure
    TEST MODE PROCEDURE WARNING LIGHT AND INDICATOR LIGHT INITIAL CHECK (a) When the ignition switch is turned to ON, check that the ABS warning light, brake warning light, TRAC OFF indicator light, VSC OFF indicator light, slip indicator light and AUTO LSD indicator light come on for approximately 3 se ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright