INSTALLATION PROCEDURE 1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
2. INSTALL FRONT UPPER ARMREST BASE PANEL LH (a) Connect the master switch connector.
|
Toyota Tundra Service Manual > Hood: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT HOOD SUB-ASSEMBLY (a) Check that the clearance measurements of areas A to D are within the standard range. Standard Clearance: Area Specified Condition A 3.7 to 6.7 mm (0.146 to 0.264 in.) B -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) C (Reference) 25.25 to 28.2 ...
