Toyota Tundra Service Manual: Removal

Toyota Tundra Service Manual / Vehicle Interior / Window / Glass / Power Window Master Switch / Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT UPPER ARMREST BASE PANEL LH

(a) Using a moulding remover A, detach the 2 clips and 5 claws, and remove the front upper armrest base panel LH.

(b) Disconnect the master switch connector.

2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

(a) Remove the 3 screws and power window regulator master switch assembly.
    On-vehicle Inspection

    Power Window Regulator Motor(for Front Door)

    See More:

    Toyota Tundra Service Manual > Transfer Assembly: Inspection
    INSPECTION PROCEDURE 1. INSPECT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY (FRONT) (a) Using a micrometer, measure the outer diameter of the output shaft companion flange sub-assembly (front) journal surface. Minimum Diameter: Journal Specified Condition A 34.962 mm (1.376 in.) B 39.955 mm (1.573 in ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0287