CAUTION / NOTICE / HINT HINT: Some
versions of "Bluetooth" compatible audio players may not function, or
the function may be limited using the navigation receiver assembly, even
if the portable audio player itself can play files (See page
PROCEDURE
(a) Check if the portable player is registered as a connected device. NOTICE: If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system. HINT: Only 5 portable players can be registered. Result
(a) Check the connection condition between the portable player and navigation receiver assembly. The portable player cannot be connected under any of the following conditions:
(a) Check the automatic connection settings of the "Bluetooth" audio. (1) Check that the "Bluetooth" connection is on. OK: "Bluetooth" connection is on.
(a) Check the status of the portable player. (1) Check that the portable player is not in standby mode. (2) Check that the portable player is not connected to another device (headphones etc.). OK: The portable player is not in standby mode and not connected to another device (headphones etc.).
(a) Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model. OK: The portable player can be connected manually/automatically.
(a) Remove additional devices which use radio waves. (b) Check if the portable player can be connected manually/automatically. OK: The portable player can be connected manually/automatically.
|
Toyota Tundra Service Manual > Power Mirror Control System(w/ Memory): Power Mirror Surface Position is not Memorized
DESCRIPTION When the seat memory switch is operated, the switch input signal is sent via CAN communication from the outer mirror control ECU assembly LH to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the memorization request or recall req ...
