Toyota Tundra Service Manual: Voice is not Recognized

PROCEDURE

1.

CHECK CONDITION

(a) Check if the system voice recognition success rate is low when recognizing a particular voice.

Result

Result

Proceed to

System voice recognition success rate is low with any voice

A

System voice recognition success rate is low only for a particular voice

B

HINT:

  • System voice recognition success rate varies depending on voice and pronunciation. This is not a malfunction.
  • When the voice recognition training function is enabled via the vehicle settings, it becomes easier to recognize the particular voice of a user.
B

CONFIRM VEHICLE SETTINGS (TRAIN VOICE RECOGNITION)

A

2.

CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK)

(a) Enter the "Microphone Check" screen. [Refer to Check Mic&Voice Recognition in Operation Check (See page )]

(b) When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

(c) Push the recording switch and perform voice recording.

  • Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.
  • Voice can be recorded for up to 5 seconds.

(d) Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

OK:

All check results are normal.

Result

Result

Proceed to

OK (for Column Shift Type)

A

OK (for Floor Shift Type)

B

NG

C

A

REPLACE NAVIGATION RECEIVER ASSEMBLY

B

REPLACE NAVIGATION RECEIVER ASSEMBLY

C

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Voice Guidance does not Function

    Park Assist / Monitoring

    See More:

    Toyota Tundra Service Manual > Automatic Transmission System: Shift Solenoid "B" Control Circuit Low (Shift Solenoid Valve S2) (P0976,P0977)
    DESCRIPTION Shifting from 1st to 6th is performed in combination with ON and OFF operation of the shift solenoid valves SL1, SL2, S1, S2, S3, S4 and SR, which are controlled by the ECM. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shif ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright www.ttundra.com
    0.0063