Toyota Tundra Service Manual: Engine Control System Malfunction (C1201)

Toyota Tundra Service Manual / Brake / Brake Control / Dynamic Control Systems / Vehicle Stability Control System / Engine Control System Malfunction (C1201)

DESCRIPTION

If a malfunction in the SFI system is detected, the operation of VSC and TRAC is prohibited by the fail-safe function. When the signals from the engine are received normally, fail-safe control is canceled.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1201

Engine Control System Malfunction

Engine control system malfunction signal continues for 0.5 seconds.

SFI system

PROCEDURE

1.

CHECK SFI SYSTEM

(a) Check if SFI system DTCs are output.

Result

Proceed to

DTCs are not output

A

DTCs are output

B
A

REPLACE ECM

B

INSPECT SFI SYSTEM

    Open in ABS Solenoid Relay Circuit (C146E)

    SM Solenoid Circuit (C1225-C1228,C1468,C1469,C146A,C146B)

    See More:

    Toyota Tundra Service Manual > Rear View Monitor System(for Radio And Display Type): Problem Symptoms Table
    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0239