Air outlets and fan speed are automatically adjusted according
to the temperature setting.
Air conditioning controls ■ Adjusting the temperature setting To adjust the temperature setting, turn the temperature control dial clockwise (warm) or counterclockwise (cool). If is not pressed, the system will blow ambient temperature air or heated air. The air conditioning system switches between individual and simultaneous mode each time is pressed. ■ Fan speed setting To adjust the fan speed, press "" on to increase the fan speed and "" to decrease the fan speed. Press to turn the fan off. ■ Change the airflow mode To change the airflow, press . Air outlets are adjusted each time the button is pressed. ■ Other functions
Using by automatic mode 1. Press . 2. Adjust the temperature setting. 3. To stop the operation, press . ■ Automatic mode indicator If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated are maintained. ■ Adjusting the temperature for driver and passenger seats separately ("SYNC" mode) The air conditioning system switches between individual and simultaneous mode each time is pressed. Simultaneous mode (the indicator on is on): The driver's side temperature control dial can be used to adjust the temperature for driver's and front passenger's side. At this time, operate the front passenger's side temperature control dial to enter individual mode. Individual mode (the indicator on is off): The temperature for the driver's and front passenger's side can be adjusted separately. Other functions ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed. ■ Defogging the windshield Defoggers are used to defog the windshield and front side windows. Press . Set the outside/recirculated air mode button to outside air mode if the recirculated air mode is used. (It may switch automatically.) To defog the windshield and the side windows early, turn the air flow and temperature up. To return to the previous mode, press again when the windshield is defogged. ■ Defogging the back window (CrewMax models) Defogger is used to defog the back window. Press . The defogger will automatically turn off after approximately 15 minutes. ■ Defogging the outside rear view mirrors (if equipped) Defogger is used to defog to remove raindrops, dew and frost from the outside rear view mirrors. Press or . The defogger will automatically turn off after approximately 15 minutes. CrewMax models: Turning the back window defogger on will turn the outside rear view mirror defoggers on. ■ Windshield wiper de-icer (if equipped) This feature is used to prevent ice from building up on the windshield and wiper blades. Press or . The defogger will automatically turn off after approximately 15 minutes. Double Cab models: Turning the outside rear view mirror defoggers on will turn the windshield wiper de-icer on. CrewMax models: Turning the back window defogger on will turn the windshield wiper de-icer on. Air outlets ■ Location of air outlets Air outlets and air volume changes according to the selected airflow mode. ■ Adjusting the position of and opening and closing the air outlets Front Direct air flow to the left or right, up or down.
Rear (CrewMax models)
■Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed. ■Fogging up of the windows
■Outside/recirculated air mode
■When the outside temperature exceeds 75ºF (24ºC) and the air conditioning system is on
■When the outside temperature falls to nearly 32ºF (0ºC) The dehumidification function may not operate even when is selected. ■Ventilation and air conditioning odors
|
Toyota Tundra Owners Manual > Driving procedures: Automatic transmission
Shifting the shift lever Floor shift type While the engine switch is in the "ON" position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped. Column shift type While the engine switch is in the "ON" po ...