Toyota Tundra Service Manual: Front Camera Module Incorrect Axial Gap (C1AA8,C1AA9)

Toyota Tundra Service Manual / Engine, Hybrid System / Cruise Control / Forward Recognition Camera System / Front Camera Module Incorrect Axial Gap (C1AA8,C1AA9)

DESCRIPTION

If the forward recognition camera detects that the forward recognition camera axis has deviated, DTC C1AA8 is stored. Also, if Forward Recognition Camera Axis Adjustment is not performed after installing the forward recognition camera, DTC C1AA9 is stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AA8

Front Camera Module Incorrect Axial Gap

After the ignition switch is turned to ON for 3 seconds or more and the forward recognition camera detects forward recognition camera axis deviated.
  • Forward recognition camera
  • Windshield glass

C1AA9

Front Camera Module Beam Axis Not Adjusted

After the ignition switch is turned to ON for 3 seconds or more, when the vehicle is being driven at a speed of 1 km/h (1 mph) or more, the forward recognition camera detects that forward recognition camera adjustment has not been completed for 5 seconds or more.

Forward recognition camera

CAUTION / NOTICE / HINT

NOTICE:

  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
  • If the forward recognition camera has been replaced with a new one, be sure to perform Forward Recognition Camera Axis Adjustment.

    Click here

PROCEDURE

1.

CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)

(a) Check if the stored DTCs are current DTCs.

(b) Check for DTCs.

Click here

Result

Proceed to

Current DTC C1AA8 is output

A

Current DTC C1AA9 is output

B

History DTC C1AA8 is output

C
B

GO TO STEP 11

C

GO TO STEP 13

A

2.

CHECK VEHICLE CONDITION

(a) Check the operating conditions of the vehicle.

HINT:

DTC C1AA8 may be stored if the forward recognition camera optical axis is temporarily misaligned due to the vehicle being overloaded.

Result

Proceed to

Vehicle is not overloaded or being towed

A

Vehicle is overloaded or being towed

B
B

GO TO STEP 9

A

3.

CHECK WHEEL ALIGNMENT

(a) Check the front wheel alignment (toe).

Click here

HINT:

DTC C1AA8 may be stored if the forward recognition camera optical axis is misaligned due to incorrect wheel alignment (toe).

Result

Proceed to

Front wheel is misaligned (toe)

A

Front wheel is not misaligned (toe)

B
B

GO TO STEP 7

A

4.

ADJUST WHEEL ALIGNMENT

(a) Adjust the alignment (toe) of the wheels.

Click here

NEXT

5.

PERFORM FORWARD RECOGNITION CAMERA OPTICAL AXIS ADJUSTMENT

(a) Perform Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust.

Click here

NEXT

6.

CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)

(a) Clear the DTCs.

Click here

(b) Make sure that the DTC detection conditions are met.

HINT:

If the conditions are not met, the system cannot detect the malfunction.

(c) Check for DTCs.

Click here

Result

Proceed to

DTC C1AA8 is not output

A

DTC C1AA8 is output

B
A

END
B

REPLACE FORWARD RECOGNITION CAMERA

7.

CHECK FORWARD RECOGNITION CAMERA INSTALLATION

(a) Check the installation condition of the forward recognition camera.

Click here

HINT:

If the forward recognition camera bracket is deformed or misaligned, replace the windshield glass.

OK:

No deformation or misalignment in the forward recognition camera bracket.

OK

GO TO STEP 5

NG

8.

REPLACE WINDSHIELD GLASS

(a) Replace the windshield glass.

Click here

NEXT

GO TO STEP 5

9.

PERFORM FORWARD RECOGNITION CAMERA OPTICAL AXIS ADJUSTMENT

(a) Return the vehicle to normal operating conditions.

(b) Perform Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust.

Click here

NEXT

10.

CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)

(a) Clear the DTCs.

Click here

(b) Make sure that the DTC detection conditions are met.

HINT:

If the conditions are not met, the system cannot detect the malfunction.

(c) Check for DTCs.

Click here

Result

Proceed to

DTC C1AA8 is not output

A

DTC C1AA8 is output

B
A

END
B

GO TO STEP 3

11.

PERFORM FORWARD RECOGNITION CAMERA OPTICAL AXIS ADJUSTMENT

(a) Perform Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust.

Click here

NEXT

12.

CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)

(a) Clear the DTCs.

Click here

(b) Make sure that the DTC detection conditions are met.

HINT:

If the conditions are not met, the system cannot detect the malfunction.

(c) Check for DTCs.

Click here

Result

Proceed to

DTC C1AA9 is not output

A

DTC C1AA9 is output

B
A

END
B

REPLACE FORWARD RECOGNITION CAMERA

13.

CLEAR DTCs

(a) Check for DTCs related to the forward recognition camera.

HINT:

If only history DTCs are stored, they may have been stored due to a temporarily condition such as overloading of the vehicle, and the system returned to normal when Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust was performed.

(b) Clear the DTCs.

Click here

NEXT

END
    Skid Control Buzzer Circuit (C1AA7)

    FCM Destination Information Uninitialized (C1AAA)

    See More:

    Toyota Tundra Service Manual > Power Window Control System(w/ Jam Protection Function): Glass Position Initialization Incomplete (B2313)
    DESCRIPTION The power window regulator motor is driven by operating the power window switch. The power window regulator sub-assembly has motor, regulator and ECU functions. When the ECU determines that the power window regulator motor has not been initialized, DTC B2313 is stored. HINT: DTC B2311 is ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0223