Toyota Tundra Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / LKA/LDA / Trouble Codes.

(e) Check for DTCs.

Click here

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / LKA/LDA / Clear DTCs.

(e) Clear the DTCs.

    Diagnostic Trouble Code Chart

    Fail-safe Chart

    See More:

    Toyota Tundra Service Manual > Heated Oxygen Sensor: On-vehicle Inspection
    ON-VEHICLE INSPECTION PROCEDURE 1. CHECK HEATED OXYGEN SENSOR (a) Disconnect the heated oxygen sensor connector. (b) Measure the heater resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 (HT1B) - 2 (+B) (for Bank 1) 20°C ( ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0164