INSPECTION PROCEDURE 1. INSPECT FRONT SHOCK ABSORBER ASSEMBLY LH  (a) Compress and extend the shock absorber rod 4 times or more. Check that there is no abnormal resistance or unusual sound during the operation.
NOTICE: When disposing of the shock absorber, see DISPOSAL (see page
|
Toyota Tundra Service Manual > Front Differential Carrier Assembly(for 4wd): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL STRAIGHT PIN (a) Using a plastic-faced hammer, tap in the straight pins until their protrusion amounts are at the specified values shown in the illustration below. Standard depth: Item a b c for Straight Pin A 19.5 to 20.5 mm (0.768 to 0.807 in.) 9.991 to 10.000 mm (0 ...
).
