Toyota Tundra Service Manual: Multiplex Communication Circuit (B1499/99)

DESCRIPTION

This DTC outputs when CAN communication error is occurred.

DTC Code

DTC Detection Condition

Trouble Area

B1499/99

Open in CAN communication circuit

CAN communication system

PROCEDURE

1.

CHECK FOR DTC

(a) Clear the DTC (see page ).

(b) Check for the DTC (see page ).

Result

Result

Proceed to

DTC B1499/99 is output

A

DTC B1499/99 is not output

B

A

GO TO CAN COMMUNICATION SYSTEM

B

USE SIMULATION METHOD TO CHECK

    BUS IC Communication Malfunction (B1497/97)

    Blower Motor Circuit

    See More:

    Toyota Tundra Service Manual > Wireless Door Lock Control System: Diagnosis System
    DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here INSPECT BATTERY VOLTAGE (a) Measure the vehicle battery voltage. Standard voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the battery. SELF-DIAGNOSTIC MODE (a) Connect the Techstream to the DLC3. (b) Turn the ignition s ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0201