CAUTION / NOTICE / HINT HINT: If the operation of a cellular phone or the radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation. PROCEDURE
(a) Check that the vehicle and cellular phone meet the following conditions: NOTICE: If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
(b) Connect the cellular phone to the in-vehicle device and check that it is connected correctly. OK: The cellular phone is connected correctly.
(a) Restart the cellular phone. (b) Turn the ignition switch off. (c) Turn the ignition switch to ACC. (d) Connect the cellular phone to the in-vehicle device and check that it is connected correctly. OK: The cellular phone is connected correctly.
(a) Check if the in-vehicle device can be recognized by the cellular phone. OK: In-vehicle device can be recognized
(a) Clear all "Bluetooth" devices registered to the cellular phone and radio and display receiver assembly. (b) Register the cellular phone again. (c) Connect the cellular phone to the in-vehicle device and check that it is connected correctly. OK: The cellular phone is connected correctly.
(a) Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle. HINT:
OK: The cellular phone is connected correctly.
(a) Check if the system functions normally using another "Bluetooth" compatible cellular phone. HINT:
OK: The cellular phone is connected correctly.
|
Toyota Tundra Service Manual > Radio Antenna: Removal
REMOVAL PROCEDURE 1. REMOVE PULL TOP ANTENNA POLE SUB-ASSEMBLY (See page ) 2. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery ter ...