Toyota Tundra Service Manual: Customize Parameters

CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

(a) Customizing with the Techstream

HINT:

The following items can be customized.

NOTICE:

  • After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  • Be sure to record the current settings before customization.
  • When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch to ON.

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Wireless Door Lock.

(5) Select the setting by referring to the table below.

Wireless Door Lock

Display (Item)

Default

Content

Setting

Wireless Control

ON

ON/OFF of wireless door lock function

ON/OFF

Hazard Answer Back

ON

When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice

ON/OFF

Wireless Buzzer Resp

ON

Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch pressed

ON/OFF

Open Door Warning

ON

If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds

ON/OFF

Unlock 2 Operation

ON

Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.

ON/OFF

Panic Function

ON

This function operates the theft deterrent system when PANIC is pressed and held for 0.8 second or more.

ON/OFF

Auto Lock Time

60s

This function controls amount of time from unlocking doors to automatic re-locking function.

30s/60s/120s

Wireless Auto Lock

ON

Function of automatically looking doors after unlocking doors with wireless key.

ON/OFF

Wireless Buzzer Vol

Level5

Wireless door lock buzzer volume

Level7/Level6/Level5/Level4/Level3/Level2/Level1/Level0

Wireless Lock Function with Doors Open

ON

Function that locks the doors if the lock switch on the door control transmitter assembly is pressed with any door open and then all of the doors are closed

ON/OFF

(b) Customizing with the Multi-display

(1) Turn the ignition switch to ON.

(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.

(3) Select the setting by referring to the table below.

Display

Default

Content

Setting

Relevant ECU

Remote 2-Press Unlock

On

Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock.

On or Off

Main body ECU (Multiplex network body ECU)

Auto Relock Timer

60 sec.

Function that regulates the interval between unlocking and automatic relocking of doors

Off, 30 sec., 60 sec. or 120 sec.

Main body ECU (Multiplex network body ECU)

Lock/Unlock Feedback-Lights

On

When the doors are locked by wireless operation, the hazard warning lights flash once.

When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

On or Off

Main body ECU (Multiplex network body ECU)

Lock/Unlock Feedback-Tone

5 bars

Wireless door lock buzzer volume

Off, 1, 2, 3, 4, 5, 6 or 7 bars

Main body ECU (Multiplex network body ECU)

Wireless Lock When Door Opened

On

Function that locks the doors if the lock switch on the electrical key transmitter sub-assembly is pressed with any door open and then all of the doors are closed

On or Off

Main body ECU (Multiplex network body ECU)

    Wireless Door Lock Control System

    Data List / Active Test

    See More:

    Toyota Tundra Service Manual > Radiator Grille: Reassembly
    REASSEMBLY PROCEDURE 1. INSTALL RADIATOR GRILLE GARNISH (for Type A) (a) Attach the 4 claws and 2 guides to install the radiator grille garnish. (b) Install 2 new spring nuts. 2. INSTALL RADIATOR GRILLE GARNISH (for Type B) (a) Attach the 4 claws and 2 guides to install the radiator grille garnish. ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0331