Toyota Tundra Service Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH

2. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

3. REMOVE REAR BUMPER PLATE LH

(a) Detach the 3 claws and clip and remove the rear bumper plate LH.

4. REMOVE REAR BUMPER PLATE RH

HINT:

Use the same procedure described for the LH side.

5. REMOVE REAR BUMPER PAD SUB-ASSEMBLY LH

(a) Remove the 3 clips.

(b) Detach the 12 claws and 2 guides and remove the rear bumper pad sub-assembly LH as shown in the illustration.

(c) Detach the clamp from the No. 2 frame wire.

6. REMOVE REAR BUMPER EXTENSION INSERT LH

(a) Remove the 8 clips and rear bumper extension insert LH.

7. REMOVE REAR BUMPER EXTENSION INSERT RH

HINT:

Use the same procedure described for the LH side.

8. REMOVE REAR BUMPER BAR CORNER REINFORCEMENT LH

(a) Remove the 5 bolts and rear bumper bar corner reinforcement LH.

9. REMOVE REAR BUMPER BAR CORNER REINFORCEMENT RH

HINT:

Use the same procedure described for the LH side.

10. REMOVE BLIND SPOT MONITOR SENSOR LH (w/ Blind Spot Monitor System)

11. REMOVE BLIND SPOT MONITOR SENSOR RH (w/ Blind Spot Monitor System)

HINT:

Use the same procedure described for the LH side.

12. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

13. REMOVE NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

14. REMOVE NO. 2 FRAME WIRE

(a) w/ Towing Package:

(1) Detach all the clamps and remove the No. 2 frame wire from the receiver hitch bracket sub-assembly.

*A

w/ Intuitive Parking Assist System

*B

w/ Blind Spot Monitor System

(b) w/o Towing Package:

(1) Detach all the clamps and remove the No. 2 frame wire from the rear bumper reinforcement sub-assembly.

*A

w/ Intuitive Parking Assist System

*B

w/ Blind Spot Monitor System

15. REMOVE REAR BUMPER SIDE STAY LH

(a) Remove the 5 bolts and rear bumper side stay LH.

16. REMOVE REAR BUMPER SIDE STAY RH

HINT:

Use the same procedure described for the LH side.

17. REMOVE REAR BUMPER PLATE

(a) Remove the 2 bolts and rear bumper plate.

*A

w/ Towing Package

*B

w/o Towing Package

18. REMOVE REAR BUMPER UPPER COVER LH

(a) Remove the 2 nuts and rear bumper upper cover LH.

19. REMOVE REAR BUMPER UPPER COVER RH

HINT:

Use the same procedure described for the LH side.

    Components

    Installation

    See More:

    Toyota Tundra Service Manual > Sfi System: Evaporative Emission Control System Leak Detected (Gross Leak) (P0455,P0456)
    DTC SUMMARY DTC No. Monitoring Item Malfunction Detection Condition Trouble Area Detection Timing Detection Logic P0455 EVAP gross leak Leak detection pump creates negative pressure (vacuum) in EVAP system and EVAP system pressure measured. Reference pressure measured at start and at end of leak che ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2024 Copyright www.ttundra.com
    0.0105