Toyota Tundra Service Manual: Door Mirror Foot Light

Components

COMPONENTS

ILLUSTRATION

Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL OUTER MIRROR LIGHT ASSEMBLY LH

(a) Attach the 2 claws to install the outer mirror light assembly LH.

(b) Connect the 2 connectors.

2. INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH

Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH

2. REMOVE OUTER MIRROR LIGHT ASSEMBLY LH

(a) Disconnect the 2 connectors.

(b) Detach the 2 claws and remove the outer mirror light assembly LH.

    Daytime Running Light Relay

    Fog Light Assembly(for Halogen Fog Light)

    See More:

    Toyota Tundra Service Manual > Sfi System: Camshaft Position Sensor "A" (Bank 1 Sensor 2) (P1340,P1342,P1343)
    DESCRIPTION The camshaft position sensor (G signal) consists of a magnet and MRE (Magnetoresistive Element). The camshaft drive gear (LH) has 3 teeth on its outer circumference. When the camshaft gear rotates, the air gap between the protrusion on the gear and the MRE changes. The change affects the ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2025 Copyright www.ttundra.com
    0.0138