Toyota Tundra Service Manual: No Sound can be Heard from Speakers

Toyota Tundra Service Manual / Audio, Visual, Telematics / Audio / Video / Audio And Visual System / No Sound can be Heard from Speakers

PROCEDURE

1.	CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

(a) In sound output setting mode, set volume, fader and balance to the initial values and check that the sound is normal.

OK:

Audio and visual system returns to normal.

END (SETTINGS ARE DEFECTIVE)

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

Microphone Circuit between Microphone and Radio Receiver

Noise Occurs or Sound Skips when Portable Player Plays

See More:

Toyota Tundra Service Manual > Propeller Shaft Assembly(for 4wd): Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING (a) Place matchmarks on the propeller shaft yoke and universal joint yoke. Text in Illustration *a Matchmark (b) Remove the grease fitting from the spider bearing. (c) Using a brass bar and hammer, slightly tap in th ...

Toyota Tundra Service Manual: No Sound can be Heard from Speakers

Microphone Circuit between Microphone and Radio Receiver

Noise Occurs or Sound Skips when Portable Player Plays

See More:

Toyota Tundra Owners Manual

Toyota Tundra Service Manual