PRECAUTION PRECAUTION FOR BULB REPLACEMENT (a) Always prepare a new bulb for immediate replacement. While replacing a bulb, the lens may attract dust and moisture if removed from the vehicle for a long time. (b) Always replace a bulb with another bulb of the same wattage. (c) If only replacing the bulb on one side, differences in brightness and lighting color between the right and left sides may occur. (d) Securely install the socket after bulb replacement. The lens may become cloudy or the light cavity may fill with water through gaps around the socket if the socket is not installed securely. HANDLING PRECAUTIONS FOR FORWARD RECOGNITION CAMERA (w/ Automatic High Beam System) (a) The automatic high beam system uses the forward recognition camera. For precautions related to the forward recognition camera, refer to Precaution for Forward Recognition Camera System. Click here |
Toyota Tundra Service Manual > Pre-collision System: Yaw Rate Sensor (C1A46)
DESCRIPTION If the millimeter wave radar sensor assembly receives a yaw rate sensor malfunction signal from the yaw rate sensor (airbag sensor assembly) or yaw rate sensor zero point malfunction signal from the skid control ECU (brake actuator assembly), DTC C1A46 will be stored. DTC No. Detection I ...