Toyota Tundra Service Manual: Reassembly

REASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL TAIL AND STOP LIGHT BULB

(a) Install the tail and stop light bulb to the tail and stop light bulb socket.

(b) Turn the tail and stop light bulb socket with the tail and stop light bulb in the direction indicated by the arrow to install them as a unit.

2. INSTALL BACK UP LIGHT BULB

(a) Install the back up light bulb to the back up light bulb socket.

(b) Turn the back up light bulb socket with the back up light bulb in the direction indicated by the arrow to install them as a unit.

3. INSTALL REAR TURN SIGNAL LIGHT BULB

(a) Install the rear turn signal light bulb to the rear turn signal light bulb socket.

(b) Turn the rear turn signal light bulb socket with the rear turn signal light bulb in the direction indicated by the arrow to install them as a unit.

    Installation

    Removal

    See More:

    Toyota Tundra Service Manual > Hood: On-vehicle Inspection
    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT HOOD SUB-ASSEMBLY (a) Check that the clearance measurements of areas A to D are within the standard range. Standard Clearance: Area Specified Condition A 3.7 to 6.7 mm (0.146 to 0.264 in.) B -1.5 to 1.5 mm (-0.0591 to 0.0591 in.) C (Reference) 25.25 to 28.2 ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright www.ttundra.com
    0.0086