Toyota Tundra Service Manual: How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

  • Use the following procedures to troubleshoot the power mirror control system.
  • *: Use the ECU.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

INSPECT BATTERY VOLTAGE

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT

3.

CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Click here

Result

Proceed to

CAN DTC is not output

A

CAN DTC is output

B

B

GO TO CAN COMMUNICATION SYSTEM

A

4.

PROBLEM SYMPTOMS TABLE

Result

Proceed to

Fault is not listed in problem symptoms table

A

Fault is listed in problem symptoms table

B

B

GO TO STEP 6

A

5.

OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check

Click here

(b) DATA LIST / ACTIVE TEST

Click here

(c) Terminals of ECU

Click here

NEXT

6.

ADJUST, REPAIR OR REPLACE

NEXT

7.

CONFIRMATION TEST

NEXT

END

    Data List / Active Test

    Operation Check

    See More:

    Toyota Tundra Owners Manual > Steps to take in an emergency: If the vehicle becomes stuck
    Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: 1. Stop the engine. Set the parking brake and shift the shift lever to P. 2. Remove the mud, snow or sand from around the rear wheels. 3. Place wood, stones or some other material to help provide ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2023 Copyright www.ttundra.com
    0.0062