Toyota Tundra Service Manual: Front Camera Module Circuit (C1AA0)

Toyota Tundra Service Manual / Vehicle Interior / Pre-collision / Pre-collision System / Front Camera Module Circuit (C1AA0)

DESCRIPTION

The millimeter wave radar sensor assembly receives information about the area in front of the vehicle from the forward recognition camera.

If the millimeter wave radar sensor assembly detects a malfunction in the forward recognition camera, it will store DTC C1AA0.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AA0

Front Camera Module Circuit

While the ignition switch is ON, the forward recognition camera detects an internal malfunction for approximately 1 second or more.

Forward recognition camera system

PROCEDURE

1.

GO TO FORWARD RECOGNITION CAMERA SYSTEM

HINT:

If DTC C1AA0 is output by the pre-collision system, perform troubleshooting for the forward recognition camera system.

Click here

NEXT

END
    Brake Control Signal Mismatch (C1A69)

    Front Camera Module Incorrect Axial Gap (C1AA8)

    See More:

    Toyota Tundra Service Manual > Tail Gate: Installation
    INSTALLATION PROCEDURE 1. INSTALL TAIL GATE MALE HINGE SUB-ASSEMBLY LH (a) Using a T40 "TORX" wrench, install the tail gate lock male hinge sub-assembly with the 2 screws. Torque: 29 N·m {296 kgf·cm, 21 ft·lbf} 2. INSTALL TAIL GATE MALE HINGE SUB-ASSEMBLY RH (a) Using a T40 "TORX&q ...

    Toyota Tundra Owners Manual

    Toyota Tundra Service Manual

    © 2026 Copyright www.ttundra.com
    0.0108