OPERATION CHECK CHECK PRE-COLLISION SYSTEM SETTING (a) Turn the ignition switch to ON. (b) Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-collision system turns on. HINT: When the ignition switch is turned to ON, the pre-collision system will automatically turn on. This can be changed through a customize setting using the Techstream. (c) Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates. ![]()
CHECK PRE-COLLISION SYSTEM SENSITIVITY SETTING (a) Turn the ignition switch to ON. (b) Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly. HINT:
|
Toyota Tundra Service Manual > Rear Seat Assembly(for Crewmax Rh Side): Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. REMOVE REAR SEAT HEADREST ASSEMBLY (a) Push the 2 lock release buttons indicated by the arrows in the illustration to release the lock, and then remove the rear seat head ...